Rave Scientific LLC

Nano 3D X-ray-Zeiss Ultra XRM - Rave Scientific

ZEISS Xradia 810 Ultra                                                          Synchrotron-quality Nanoscale 3D X-ray Imaging                                              Extending the Reach and Value of Non-destructive Nanoscale Imaging        Achieve spatial resolution down to 50 nm with ZEISS Xradia 810 Ultra X-ray microscope, the highest among lab-based X-ray imaging systems. Experience unparalleled performance and flexibility with the non-destructive 3D imaging that plays a vital role in today’s breakthrough research. The innovative Xradia Ultra architecture, with unique X-ray optics adapted from synchrotron technology, features absorption and phase contrast. Now with energy at 5.4 keV you can increase the throughput of your nanoscale imaging by up to a factor of 10. Achieve even better contrast and image quality for medium to low Z samples with the lower energy of Xradia 810 Ultra. Expect to accomplish advanced in situ and 4D capabilities for studying structural evolution over time and under varying conditions. Extend the limits of exploration with 3D X-ray imaging for materials research, life sciences, natural resources, and diverse industrial applications. Contact Us for More Information

Tungsten/Lab6 SEM-ZEISS EVO SEM - Rave Scientific

ZEISS EVO Scanning Electron Microscope Overview {loadposition product-slider} Configure a versatile, multi-purpose solution for central microscopy facilities or industrial quality assurance laboratories. Since 1965 the ZEISS conventional electron microscope has set the standard for performance and ease of use. The EVO scanning electron microscope is a modular SEM Platform designed for intuitive operation, routine investigations and research applications. The instruments of the EVO family combine high performance scanning electron microscopy with an intuitive, user-friendly experience that appeals to both trained microscopists and new users. With its comprehensive range of available options, EVO can be tailored precisely to your requirements, whether you are in life sciences, material sciences, or routine industrial quality assurance. and failure analysis.   Unique Features Variety of different chamber sizes and stage options that meet all your application requirements—even for large industrial parts and samples that can be a challenge to process with an SEM. Lanthanum Hexaboride (LaB6) emitters that will maximize image quality, delivering more beam brightness for superior image resolution and noise reduction. Best in class variable pressure operation. Experience image analytical excellence on non-conductive samples with variable pressure operation. Excellent analytical geometry and flexibility. Users benefit from a design that accommodates multiple analytical detectors to support demanding microanalysis applications. Ease of use by design. Expert users have the option for a more advanced experience with the SmartSEM® graphical user interface, control panel and joystick or SmartSEM Touch® a novice and easy to use touch screen experience.     The EVO Family Vacuum Chamber Size Options   ZEISS EVO 10 ZEISS EVO 15 ZEISS EVO 25   Choose EVO 10—with optional backscatter detector and Element EDS system—to be your entry point to scanning electron microscopy, at a remarkably affordable price. Even this smallest of EVO vacuum chambers is well differentiated from tabletop SEMs. Your investment in EVO now assures that you are ready for applications that require more space and ports than you anticipate today. EVO 15 demonstrates the flexibility concept of the EVO family and excels in analytical applications. Opt for the larger vacuum chamber of the EVO 15, and add variable pressure for imaging and analysis of non-conductive samples or parts, and you have a versatile, multi-purpose solution for central microscopy facilities or industrial quality assurance laboratories. EVO 25 is the industrial workhorse solution with enough space to accommodate even the largest parts and assemblies. Expand EVO 25 capabilities further with an optional 80 mm Z travel stage that can handle weights up to 2 kg even with tilt. Additionally, the large chamber will accommodate multiple analytical detectors for the most demanding microanalysis applications. Maximum specimen heights 100 mm 145 mm 210 mm Maximum specimen diameter 230 mm 250 mm 300 mm Motorized stage travel XYZ 80 x 100 x 35 mm 125 x 125 x 50 mm 130 x 130 x 50 (or 80) mm High Vacuum (HV) mode Best quality imaging and analysis on conductive samples Variable Pressure (VP) mode High quality imaging and analysis on uncoated, non-conductive samples Extended Pressure (EP) mode Environmental imaging of hydrated or contaminated samples in their natural state Contact Us   Expert Users SmartSEM: Interface and controller for experienced users Novice Users SmartSEM Touch: Simplified graphical interface which runs from a touchscreen PC     Take Your Investigation to the Next Level with Lab6 Electron emission from a lanthanum hexaboride cathode, rather than a traditional tungsten hairpin filament, provides the reassurance that every extra bit of image quality is there when you need it. And that is a benefit you can put into action in two ways: At equivalent electron probe sizes (i.e. resolution), there is more probe current to work with, which makes image navigation and optimization much easier. At equivalent probe currents (signal-to-noise), the beam diameter is much smaller, resulting in enhanced image resolution. At challenging imaging conditions, LaB6 users benefit from up to 10 times more beam brightness, resulting in improved image resolution and contrast. As shown above, Catalyst particles imaged at high magnification and low kV (left: Tungsten, right: LaB6).     ZEISS SmartEDX-Fully integrated EDS solution Embedded EDS Solution for Routine SEM Microanalysis Applications If SEM imaging alone isn’t enough to gain a complete understanding of parts or samples, investigators will turn to Energy Dispersive Spectroscopy (EDS) to acquire spatially resolved elemental chemistry information. Optimized for routine microanalysis applicationsSEM and EDS have to be paired with careful consideration. SmartEDX on EVO is ideally suited for routine microanalysis applications, particularly for customers with high standards for data reproducibility. It provides highest throughput at 129 eV energy resolution and 1-5 nA probe current – typical EVO operating condition. SmartEDX is optimized to detect low energy X-rays from light elements thanks to superior transmissivity of the silicon nitride window. Workflow-guided graphical user interfaceSmartEDX is developed to improve both ease of use and workflow repeatability in multi-user environments. Like other ZEISS workflow-guided software solutions, such as SmartSEM Touch, ZEN core, or Shuttle & Find for EVO, the SmartEDX software is easy to learn, intuitive to use, and helps ensure repeatable execution of analytical tasks on the SEM, particularly in environments where more than one operator will be using the system. Total ZEISS service and system supportBecause SmartEDX is supported entirely by ZEISS, this EDS solution is ideal for customers with a vested interest in streamlining their number of analytical equipment suppliers. All installation, preventive maintenance, warranty, diagnostics and repair, spare part logistics, and inclusion in total system service contracts are fully handled by ZEISS, making support of your analytical SEM solution easy.   Intelligent Navigation and Imaging Improve Your Sample Throughput, Productivity and Performance ZEISS Navigation Camera A camera can be mounted either to the chamber to monitor the position of the samples relative to the pole piece mounted backscattered detector (chamberscope); or on the vacuum chamber door (navigation camera) to enable a helicopter view of the arrangement of samples or parts on the sample holder. This view can then be used to set up predefined locations of interest identified from a light microscope image, and for easy navigation during the entire sample investigation process. Automated Intelligent ImagingEVO enables automated, unattended acquisition of images across sample batches. ZEISS Automated Intelligent Imaging is perfectly suited to routine inspection. It enables the user to define a boundary region, automatically generate regions of interest determined by the required field of view or magnification, and begin automated acquisition. Automated Intelligent Imaging will improve your sample throughput, boosting productivity and performance. Contact Us for More Information