Snowboard, Ski, Surf & Bike wax, tuning tools, accessories & more.
We are extremely fortunate to have so many great relationships with so many riders over the years! A room in the back of the shop was used for storage, wax production, traction pads, and an occasional surfboard lay-up. Paul Ferrel (Mervin, Bent Metal Bindings product designer) worked at the shop and developed ONE MFG’s first snowboard stomp pad’s called “Atomic Fern”. Founded, owned, and ran by folks that live and breathe the mountains.
This company is:
Verified
Roto Snowboard Waxing Brush - Oneball Snowboard Tuning Tools – ONE MFG Store
High quality Roto-Brush Handle with Hand Guard only. Mounts into most larger drill chucks. To be used with ONE MFG 11" Brushes only. Returns are not accepted with this item. Size: 11" long Materials: Stainless steel and plastic.
Verified
Mini-Wax Tuning Kit for Snowboard / Ski – ONE MFG Store
Quickly get your board and skis up to speed with the Mini-Wax Kit! It works awesome! Mini-Wax Tuning Kit contains: F-1 All Temp Wax 65g and a Plastic 6" Scraper. Rub-On Wax Instructions: 1. Dry base 2. Warm base if possible (easier to wax). 3. Wear a glove for edge protection. 4. Rub wax into base with pressure. Apply to completely cover. 5. Use cork to polish wax into base. 6. Lightly scrape off (if possible). 7. Lightly brush out or polish to remove extra wax.. Waxing, Scraping, Iron Instructions: 1. Select correct temperature specific wax by checking mountain conditions/snow report... (actual snow temperature, not air). 2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE! 3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base, tip to tail. 4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper. 5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast. Tuning Instructions: 1. Place board or skis in a vise to secure, clean base with a fresh hot wax job and scrape or use ONE MFG Base Cleaner. 2. Check the side and base edges for burrs. Rub a ceramic, diamond, or gummy stone over the area to remove burrs in preparation for edge shaping. 3. Use the ONE MFG edge tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction...look for the arrow. 4. If you like your board or skis to be catch free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat. 5. For really sharp edges, take a fine diamond stone or polishing stone, and go over the edge again using the same technique. 6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch free. Keep your edge tool clean with the file brush! Enjoy your Speed!
Verified
MC Bus Snowboard Stomp Pad - One Mfg - Oneball Snowboard Accessories – ONE MFG Store
MC BUS art stomp pad/traction pad from MC's Lib Tech Radical Rick snowboard. This traction pad has a clear material over the MC BUS graphic with our new cone shaped stud design. It is extremely hard to scratch. We use a propriety rubberized material that is light, waterproof, and nearly indestructible. Super durable clear material over the classic MC BUS graphic. Specially designed cone shaped studs provide great traction. Help your foot stay where it should be when getting off chair lifts or when you ride with one foot strapped in. This pad is molded and produced in our Belfair Factory! Color: Off white, white, and pastels. Size: 6.5" x 3.25" Instructions: 1. Clean board surface and dry completely. Use ONE MFG Base Cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes. 2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge. 3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want. 4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your home and let the stomp pads rest overnight.
View all products
Keywords
Industries
City: Bremerton
State: Washington
Country: United States
Where is The Faction Ltd located?
The company The Faction Ltd is located in Bremerton, Washington, United States. It's worth noting that the company may has more corporate locations
How many employees does The Faction Ltd approximately have?
As of the latest available information The Faction Ltd has around 1-10 employees worldwide.
When was The Faction Ltd founded?
The Faction Ltd was founded in 1988
In which industries does The Faction Ltd mainly work?
The company The Faction Ltd has it's main focus in the industries of Manufacturing
Mervin Manufacturing Inc.
United States
51-100 Employees
1977
4frnt Skis, Inc.
United States
1-10 Employees
2003
Liberty Skis Corporation
United States
11-50 Employees
2009
Carver Skateboards
United States
11-50 Employees
1996
Mtn. Culture Food & Beverage Company
United States
1-10 Employees
2017
Boards & More
Austria
2000
Flight Snowboards
Australia
Money Ruins Everything Inc.
United States
1-10 Employees
2013
Topics which have been searched by others and may be interesting for you: