Hydrophobic
Hydrophobic

Filter

Locations


Result types


Type of company


Industries


Company status

Number of employees

to

Founding year

to


Lock keywords

Exclude keywords

Optional keywords

Clear filters

Products and services for "Hydrophobic"

Image for 
Super Hydrophobic
Product

Verified

Super Hydrophobic

Super hydrophobic is a special coating technology, which creates hydrophobic property to the lens surface and makes the lens always clean and clear. Features - Repels moisture and oily substances thanks to hydrophobic and oleophobic properties - Helps to prevent the transmission of undesired ray...

by UNIVERSE OPTICAL MFG CO. LTD

Image for Syringe filter, STERILE, PTFE Hydrophobic
– ProSciTech
Product

Verified

Syringe filter, STERILE, PTFE Hydrophobic – ProSciTech

Hydrophilic PTFE membrane is unsupported membrane that ideal for HPLC and mixtures of aqueous and organic solvents. Unsupported membrane means non-reinforced, single-ply thin membrane which has no support ability. Features *Lowest level of IC extractables, optimizing background levels in sensitive IC analyses *Standard

by ProSciTech Pty Ltd

Image for Hydrophobic Acrylic - Pammvi Inc.
Product

Verified

Hydrophobic Acrylic - Pammvi Inc.

Hydrophobic material has been shown to have less chance of PCO, inflammatory cell response, bacterial adhesion with minimum pigment deposition.

by Pammvi Inc.

Image for Microscope slides, Teflon printed, hydrophobic, black
– ProSciTech
Product

Verified

Microscope slides, Teflon printed, hydrophobic, black – ProSciTech

Teflon and hydrophobic printed microscope slides offer shallow wells for testing, reactions and then convenient microscopic observation. Clear white glass, German Superwhite with zero fluorescence, 76 x 26 x 1 mm, ground edges, black hydrophobic ink.G350308BK  3 wells of 8 mm diameter.G350805BK  8 wells of 5 mm diamete

by ProSciTech Pty Ltd

Image for Syringe filter, non-sterile, hydrophobic PTFE
– ProSciTech
Product

Verified

Syringe filter, non-sterile, hydrophobic PTFE – ProSciTech

Hydrophobic PTFE membranes are chemically resistant to virtually all solvents, acids and bases. Low extraction and has an excellent thermal stability. Good use with aggressive solvents, strong acids, alcohols, bases, aromatics.Syringe filters are used for small volume filtration of liquids, gas and other material-speci

by ProSciTech Pty Ltd

Image for Syringe filter, non-sterile, hydrophobic PVDF
– ProSciTech
Product

Verified

Syringe filter, non-sterile, hydrophobic PVDF – ProSciTech

Hydrophobic PVDF membranes are suitable for use with a wide range of applications from filtering of biological samples to clarify mild organic HPLC solutions. Provides fast flow rates and is generally compatible with most common solvents. Exhibits very low protein binding, make it ideal for protein recovery application

by ProSciTech Pty Ltd

Image for 
    
    Hydrophobic Vent Filter Kit
    
     | CO2Meter.com
Product

Verified

Hydrophobic Vent Filter Kit | CO2Meter.com

Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications like:  In-Situ Incubation Mushroom Growers Caving Fruit and Vegetable Transportation Easy to install, each kit contains a set of filters for 1 unit.  CM-0173 filter kit used with CM-0039 - 1% CO2 Probe USB Data Logger CM-0040 - 30% CO2 Probe USB Data Logger CM-0173 kit includes three (3) custom filters. Properties 1.5mm sheets of Porex brand polypropylene (PP) material were used to achieve the desired filtering. The filter is rated at 120 to 50 microns. This means that the outside of the filter accepts particles in ambient air up to 120 microns, but the porosity is reduced so that by the time ambient air reaches the inside of the data logger, only particles smaller than 50 microns are passed through. Effect on Reaction Time Any material that limits airflow over a diffusion sensor will have some small effect on sensor reaction time. However, we have discovered in testing that the PP material does not slow down the reaction time when the data logger interval is set to 30 seconds or greater. If a higher rate of reaction time is required, you should consider a sample draw data logging meter with a built-in pump. Sensor Filter In addition to the PP filters, all our NDIR diffusion CO2 sensors have an additional filter on top of the sensor. This filter must remain clean and dry to ensure accurate CO2 level readings. If the CO2 sensor filter gets wet, it will no longer accurately read CO2 levels. Under normal conditions, you may be able to simply let this filter dry out to start working again. However, moisture inside the data logger could ruin other components and will void the warranty. Warranty While the filters should last a lifetime, under the most extreme conditions it is possible that they may become contaminated. As a rule, PP may be used at temperatures ranging from 200 to 300° F (93°C to 149°C). Thus, PP products can be sterilized in an autoclave. You may also send the data logger to CO2Meter.com for filter replacement. Manual (pdf) CM-0173 Dimensional Drawings (pdf)

by CO2 Meter

Image for 
    
    Hydrophobic Vent Filter Kit
    
     | CO2Meter.com
Product

Verified

Hydrophobic Vent Filter Kit | CO2Meter.com

Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications like:  In-Situ Incubation Mushroom Growers Caving Fruit and Vegetable Transportation Easy to install, each kit contains a set of filters for 1 unit.  CM-0173 filter kit used with CM-0039 - 1% CO2 Probe USB Data Logger CM-0040 - 30% CO2 Probe USB Data Logger CM-0173 kit includes three (3) custom filters. Properties 1.5mm sheets of Porex brand polypropylene (PP) material were used to achieve the desired filtering. The filter is rated at 120 to 50 microns. This means that the outside of the filter accepts particles in ambient air up to 120 microns, but the porosity is reduced so that by the time ambient air reaches the inside of the data logger, only particles smaller than 50 microns are passed through. Effect on Reaction Time Any material that limits airflow over a diffusion sensor will have some small effect on sensor reaction time. However, we have discovered in testing that the PP material does not slow down the reaction time when the data logger interval is set to 30 seconds or greater. If a higher rate of reaction time is required, you should consider a sample draw data logging meter with a built-in pump. Sensor Filter In addition to the PP filters, all our NDIR diffusion CO2 sensors have an additional filter on top of the sensor. This filter must remain clean and dry to ensure accurate CO2 level readings. If the CO2 sensor filter gets wet, it will no longer accurately read CO2 levels. Under normal conditions, you may be able to simply let this filter dry out to start working again. However, moisture inside the data logger could ruin other components and will void the warranty. Warranty While the filters should last a lifetime, under the most extreme conditions it is possible that they may become contaminated. As a rule, PP may be used at temperatures ranging from 200 to 300° F (93°C to 149°C). Thus, PP products can be sterilized in an autoclave. You may also send the data logger to CO2Meter.com for filter replacement. Manual (pdf) CM-0173 Dimensional Drawings (pdf)

by CO2 Meter

Image for 
    
    Hydrophobic Vent Filter Kit
    
     | CO2Meter.com
Product

Verified

Hydrophobic Vent Filter Kit | CO2Meter.com

Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications like:  In-Situ Incubation Mushroom Growers Caving Fruit and Vegetable Transportation Easy to install, each kit contains a set of filters for 1 unit.  CM-0173 filter kit used with CM-0039 - 1% CO2 Probe USB Data Logger CM-0040 - 30% CO2 Probe USB Data Logger CM-0173 kit includes three (3) custom filters. Properties 1.5mm sheets of Porex brand polypropylene (PP) material were used to achieve the desired filtering. The filter is rated at 120 to 50 microns. This means that the outside of the filter accepts particles in ambient air up to 120 microns, but the porosity is reduced so that by the time ambient air reaches the inside of the data logger, only particles smaller than 50 microns are passed through. Effect on Reaction Time Any material that limits airflow over a diffusion sensor will have some small effect on sensor reaction time. However, we have discovered in testing that the PP material does not slow down the reaction time when the data logger interval is set to 30 seconds or greater. If a higher rate of reaction time is required, you should consider a sample draw data logging meter with a built-in pump. Sensor Filter In addition to the PP filters, all our NDIR diffusion CO2 sensors have an additional filter on top of the sensor. This filter must remain clean and dry to ensure accurate CO2 level readings. If the CO2 sensor filter gets wet, it will no longer accurately read CO2 levels. Under normal conditions, you may be able to simply let this filter dry out to start working again. However, moisture inside the data logger could ruin other components and will void the warranty. Warranty While the filters should last a lifetime, under the most extreme conditions it is possible that they may become contaminated. As a rule, PP may be used at temperatures ranging from 200 to 300° F (93°C to 149°C). Thus, PP products can be sterilized in an autoclave. You may also send the data logger to CO2Meter.com for filter replacement. Manual (pdf) CM-0173 Dimensional Drawings (pdf)

by CO2 Meter

Image for 
    
    Hydrophobic Vent Filter Kit
    
     | CO2Meter.com
Product

Verified

Hydrophobic Vent Filter Kit | CO2Meter.com

Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications like:  In-Situ Incubation Mushroom Growers Caving Fruit and Vegetable Transportation Easy to install, each kit contains a set of filters for 1 unit.  CM-0173 filter kit used with CM-0039 - 1% CO2 Probe USB Data Logger CM-0040 - 30% CO2 Probe USB Data Logger CM-0173 kit includes three (3) custom filters. Properties 1.5mm sheets of Porex brand polypropylene (PP) material were used to achieve the desired filtering. The filter is rated at 120 to 50 microns. This means that the outside of the filter accepts particles in ambient air up to 120 microns, but the porosity is reduced so that by the time ambient air reaches the inside of the data logger, only particles smaller than 50 microns are passed through. Effect on Reaction Time Any material that limits airflow over a diffusion sensor will have some small effect on sensor reaction time. However, we have discovered in testing that the PP material does not slow down the reaction time when the data logger interval is set to 30 seconds or greater. If a higher rate of reaction time is required, you should consider a sample draw data logging meter with a built-in pump. Sensor Filter In addition to the PP filters, all our NDIR diffusion CO2 sensors have an additional filter on top of the sensor. This filter must remain clean and dry to ensure accurate CO2 level readings. If the CO2 sensor filter gets wet, it will no longer accurately read CO2 levels. Under normal conditions, you may be able to simply let this filter dry out to start working again. However, moisture inside the data logger could ruin other components and will void the warranty. Warranty While the filters should last a lifetime, under the most extreme conditions it is possible that they may become contaminated. As a rule, PP may be used at temperatures ranging from 200 to 300° F (93°C to 149°C). Thus, PP products can be sterilized in an autoclave. You may also send the data logger to CO2Meter.com for filter replacement. Manual (pdf) CM-0173 Dimensional Drawings (pdf)

by CO2 Meter

768 companies for "Hydrophobic"

Trapo's Logo

Special Capital Region of Jakarta, Indonesia

11-50 Employees

2017

+

Featured

Product
Image for Trapo Hydrophobic Klip

Trapo Hydrophobic Klip

... Trapo Hydrophobic Klip - Trapo ...

Dymax Oligomers & Coatings is now BOMAR's Logo

Torrington, United States

251-500 Employees

For over 30 years, Bomar has been a leading innovator of advanced-performance materials for energy (UV/EB), light, and other free-radical cure applications. We have coupled our technical strength in acrylate and urethane chemistry with a strong emphasis on new product development. Our scientists synthesize a broad range of select specialty oligomers, custom-designed to satisfy the unique performance requirements of emerging application technologies, while providing customers an edge in formulating products with outstanding performance, reproducibility, and cost effectiveness. In addition to oligomer synthesis, we assist companies with coatings formulation, custom blending, toll manufacturing, and contract manufactured coatings solutions. With a global presence, we specialize in the manufacture of raw materials for UV/EB applications such as oligomers, resins, and additives.

+

Featured

Product
Image for BRC-8430E: Hydrophobic Urethane Acrylate Oligomer

BRC-8430E: Hydrophobic Urethane Acrylate Oligomer

... BRC-8430E: Hydrophobic Urethane Acrylate ...

Silkor Ltd's Logo

Velyka Dymerka, Ukraine

11-50 Employees

1999

+

Featured

Product
Image for Hydrophobic agent GKZH-A

Hydrophobic agent GKZH-A

... Hydrophobic agent GKZH-A Order now! Call 044 330-06-47 ✅The best price ✅Wholesale deliveries from the manufacturer ✅Fast delivery - Silkor ...

Data Support Co. Inc.'s Logo

Irvine, United States

11-50 Employees

1992

+

Featured

Product
Image for Tremont IWT-PTFE-045047 Hydrophobic PTFE membrane, 47mm diameter, 100/pk

Tremont IWT-PTFE-045047 Hydrophobic PTFE membrane, 47mm diameter, 100/pk

... Hydrophobic PTFE membrane, NON-STERILE, 0.45 micron, 47mm diameter, pack of ...

ITEKT's Logo

Montreal, Canada

11-50 Employees

2016

ITEKT windshield does not use silicone, oil, grease or other harsh chemicals. It is the most effective, durable but environmentally friendly liquid glass protection on the market today. Mainly made of sand (silica (SiO2)) compressed at the molecular level, ITEKT uses the power of science and nanotechnology to design a unique liquid glass formulation that has been laboratory tested and proven to act as a natural shield. When applied, ITEKT’s innovative liquid glass coating fills the pores and perfectly combines with the windshield, leaving a flawless finish that is completely invisible to the naked eye and touch. After drying, this coating will generate an electric charge, which helps to repel water, dirt, frost, etc., so you can drive safely, reduce the use of washer fluid, and protect you and your family. Guided by our core values, our mission is to provide high-performance liquid glass protection, made with natural ingredients, and help make our world more sustainable.

+

Featured

Product
Image for ITEKT Windshield Premium Hydrophobic Nanotechnology Protection

ITEKT Windshield Premium Hydrophobic Nanotechnology Protection

... ITEKT Windshield Premium Hydrophobic Nanotechnology ...

Pioneer Technology Solutions's Logo

Saint Paul, United States

1-10 Employees

2012

With a more cost-effective, EPRI-tested solution to reducing. pollution, flashovers, contamination on the surface of your. 2-3 days of planned maintenance can cost tens of thousands of dollars. Cleaning and recoating are expensive and can take you offline for days. Planned or not, outages pose safety risks, downtime and a disruption to your workflow.

+

Featured

Core business
Image for Home - Pioneer Technology Solutions | Nanotechnology | Hydrophobic Coatings for the Electric Power Industry

Home - Pioneer Technology Solutions | Nanotechnology | Hydrophobic Coatings for the Electric Power Industry

... Home - Pioneer Technology Solutions | Nanotechnology | Hydrophobic Coatings for the Electric Power ...

FREEDOM OPHTHALMIC PVT LTD's Logo

Hosur, India

251-500 Employees

2005

With its head office in FRANCE, FREEDOM MEDICARE SAS, and its manufacturing plant in INDIA since 2005, FREEDOM OPHTHALMIC PVT LTD is one of the leading manufacturers and distributor of high quality Intraocular lenses, Micro Surgical Blades, Capsular Tension Ring, and Surgical Instruments through all the world. Our manufacturing unit covering more than 150,000 sqft is located in Hosur, Tamil Nadu, India, equipped with latest imported machinery to develop excellent quality of ophthalmic devices. FREEDOM OPHTHALMIC PVT LTD is the First licensed IOL manufacturer in India. Our products carry: CE 2460 DNV certificate, ISO 13485:2016. Our qualified, committed Design and Development team strive to meet the requirement of ophthalmic community.

+

Featured

Product
Image for IFU HYDROPHOBIC - Freedom Ophthalmic

IFU HYDROPHOBIC - Freedom Ophthalmic

... Instruction for USE - Hydrophobic ...

NV Automotive USA's Logo

Charlotte, United States

1-10 Employees

2006

All Orders Placed Between July 1st-4th Will Be Packed & Shipped July 5th! Happy Holidays! Unlock crazy water-repellency, gloss and protection with just a spray & wipe. High performance car care products that are so simple to use. Now with 1400+ reviews averaging 4.9/5 stars, Nv is our highest praised brand in our store! Nova Coatings help repel dirt and grime in between washes, while also making cleaning effortless.

+

Featured

Product
Image for Nova Jet | Hydrophobic Spray Coating

Nova Jet | Hydrophobic Spray Coating

... An incredibly easy to use spray coating that unlocks deep gloss & produces a super hydrophobic surface that makes maintenance effortless.  About JET Nova Jet is our signature spray coating that really propelled the development of the latest NV formula range. Jet features incredible gloss ...

Redifil Nonwovens's Logo

Bhunava, India

251-500 Employees

2011

At Redifil Nonwovens, we pioneer and innovate the way industries work with nonwovens and performance materials. Under the Brand – Redifil Nonwovens, we manufacture PP Spunbond Nonwoven fabrics like Super Soft, Laminated, Hydrophilic and Hydrophobic Speciality Nonwoven fabrics. Being cost effective, high performance and lightweight, our products have a wide range of applications across industries. Redifil Nonwoven Fabrics are degradable, ideal for personal care, hygiene, medical usage and next-to-skin applications. Redifil offers a wide range of fabrics for nonwoven applications with a focus on sustainability, innovation and partnership.

+

Featured

Product
Image for Hydrophilic and Hydrophobic Non Woven Fabric

Hydrophilic and Hydrophobic Non Woven Fabric

... Hydrophilic and Hydrophobic Non Woven Fabric - Redifil Nonwovens leading of Best Hydrophilic and Hydrophobic Non Woven Fabric, Hydrophilic and Hydrophobic Non Woven Fabric Manufacturer in ...

DIZA NONWOVEN LLP's Logo

Morbi, India

51-100 Employees

2020

Our mission is to design, produce and deliver high-quality Nonwoven solutionstailored to the needs of every different brand. We take problems out of your handsto make the perfect product feel incredibly simple. DIZA is established to specialize within the manufacturing and supplying of qualitative polypropylene Spunbond Nonwoven fabric. Our company is accredited by the standard certification of ISO 9001: 2015 that assures the customers about the quality of the products. We are counted among the recognized firms engaged in manufacturing, exporting, and supplying a large range of PP Spunbonded Nonwoven fabric.

+

Featured

Product
Image for Hydrophobic Nonwoven Fabric

Hydrophobic Nonwoven Fabric

... Hydrophobic Nonwoven Fabric – Diza ...

Show More

„Hydrophobic“

Hydrophobic is a term used to describe molecules or surfaces that repel water and do not mix or dissolve in it. These molecules or surfaces tend to be non-polar or have very low polarity, meaning they do not bond easily with water molecules. Common examples of hydrophobic molecules are oils, waxes and fats.